PP-RJ-SC - Patch panel

2703016

Patch panel, RJ45 jack on screw terminal blocks, CAT5e, 10/100/1000 Mbps, DIN rail adapter, IP20, shield contacting with strain relief

Ethernet patch panels enable quick and easy connection between the field cabling and control cabinet cabling. The passive termination panels are a convenient alternative to the on-site assembly of RJ45 connectors.

Utilization restriction
CCCex note Use in potentially explosive areas is not permitted in China.

Product type Patch panel
MTTF 105699 Years
Insulation characteristics
Overvoltage category II
Pollution degree 2

Maximum power dissipation for nominal condition 0 W (passive module, no supply voltage required)
Rated insulation voltage 85 V DC (In accordance with EN/IEC 60079-7, Annex H)

Data: Ethernet interface, 10/100/1000Base-T(X) in accordance with IEEE 802.3
Serial transmission speed 10/100/1000 Mbps
Frequency range 125 MHz
Connection method Screw connection
Note on the connection method CAT5e
Tightening torque 0.22 Nm ... 0.25 Nm
Pin assignment 1:1
Transmission length 100 m (including patch cables)
Single conductor/terminal point, rigid 0.14 mm² ... 1.5 mm²
Single-wire/terminal point, flexible 0.14 mm² ... 1.5 mm²
Max. AWG conductor cross section, flexible 16
Min. AWG conductor cross section, flexible 28
Single-wire/terminal point, rigid AWG max. 16
Single-wire/terminal point, rigid AWG min. 28
Stripping length 5 mm
Transmission medium Copper
Output nominal voltage < 57 V DC
Maximum output power 60 W
Maximum output current 725 mA (Per channel)
Data: Ethernet interface, 10/100/1000Base-T(X) in accordance with IEEE 802.3
Connection method RJ45 jack

Dimensional drawing
Width 23.8 mm
Height 101.3 mm
Depth 50 mm

Color (Housing) light grey (RAL 7035)
Material (Housing) Plastic
Flammability rating according to UL 94 V0

External cable diameter 5.5 mm ... 6.5 mm

Ambient conditions
Degree of protection IP20 (Manufacturer's declaration)
Ambient temperature (operation) -40 °C ... 75 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C
Altitude ≤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation)
≤ 2000 m (Restrictions for ATEX applications)
Permissible humidity (operation) 10 % ... 95 % (non-condensing)

CE
Certificate CE-compliant
ATEX
Identification  II 3 G Ex ec IIC Gc
Certificate PxCIF18ATEX2703015U
Note Please follow the special installation instructions in the documentation!
UKEX
Identification  II 3 G Ex ec IIC Gc
Certificate PxCIMA22UKEX2703015U