PP-RJ-IDC-F - Patch panel

2703023

Patch panel, RJ45 jack on IDC terminal blocks, CAT5e, 10/100/1000 Mbps, DIN rail adapter, IP20, shield contacting with strain relief, shield current monitoring, surge protection

Ethernet patch panels enable quick and easy connection between the field cabling and control cabinet cabling. The passive termination panels are a convenient alternative to the on-site assembly of RJ45 connectors. The IDC fast connection terminal blocks enable tool-free connection without stripping the single-core wires. The terminal blocks with inserted wires are simply pressed shut by hand. Observe the permissible single-core wire diameter and the permissible insulation material.

Utilization restriction
EMC note EMC: class A product, see manufacturer's declaration in the download area
Utilization restriction
CCCex note Use in potentially explosive areas is not permitted in China.

Product type Patch panel
IEC test classification C2
MTTF 3281 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
1245 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%)
472 Years (SN 29500 standard, temperature 40°C, operating cycle 100%)
Insulation characteristics
Overvoltage category II
Pollution degree 2

Electrical isolation FE // Ethernet
Maximum power dissipation for nominal condition 0 W
Rated insulation voltage 85 V DC
Supply
Supply voltage range 36 V DC ... 52 V DC ±10 % (via PoE)
42 V DC ... 57 V DC (in acc. with UL)
Function
Designation Shield current monitoring
Switch-on threshold ≥ 30 mA
Local diagnostics Yellow LED
Precision ± 5 %
Response time 3 s
Current ≤ 1.5 A
Power consumption 270 mW (Shield current monitoring)
Impedance ≤ 1 Ω
Voltage ≤ 10 V

Data: Ethernet interface, 10/100/1000Base-T(X) in accordance with IEEE 802.3
Serial transmission speed 10/100/1000 Mbps
Frequency range 125 MHz
Connection method IDC connection
Note on the connection method CAT5e
Pin assignment 1:1
Transmission length 100 m (including patch cables)
Single conductor/terminal point, rigid 0.14 mm² ... 0.34 mm²
Single-wire/terminal point, flexible 0.14 mm² ... 0.34 mm²
Max. AWG conductor cross section, flexible 22
Min. AWG conductor cross section, flexible 26
Single-wire/terminal point, rigid AWG max. 22
Single-wire/terminal point, rigid AWG min. 26
Wire diameter incl. insulation 1.6 mm (Terminal block is tested with PVC insulation - other insulation materials available on request)
Frequency of connections between conductors of the same cross section 10
Transmission medium Copper
Maximum output power 60 W
Maximum output current 725 mA (PoE)
Current carrying capacity ≤ 1.5 A (≤ 60 W (PoE+))
Data: Ethernet interface, 10/100/1000Base-T(X) in accordance with IEEE 802.3
Connection method RJ45 jack

Optical representation Yellow LED

Dimensional drawing
Width 23.8 mm
Height 101.3 mm
Depth 86 mm

Color (Housing) light grey (RAL 7035)
Material (Housing) Plastic
Flammability rating according to UL 94 V0

External cable diameter 5.5 mm ... 6.5 mm

Ambient conditions
Degree of protection IP20 (Manufacturer's declaration)
Ambient temperature (operation) -40 °C ... 75 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C
Altitude ≤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation)
≤ 2000 m (Restrictions for ATEX applications)
Permissible humidity (operation) 10 % ... 95 % (non-condensing)