PLC-TR-1T-MUL-300M-PT - Timer relay

2910141

Multi-function timer relay with 4 functions in an ultra-narrow design, adjustable time range (0.1 s - 300 min), 1 changeover contact, Push-in connection

Product type Timer relay
Operating mode 100% operating factor
Mechanical service life 2 x 107 cycles
Insulation characteristics
Overvoltage category III
Pollution degree 2

Service life electrical 2x 105 cycles
Nominal power consumption 0.45 W (at 24 V DC)
Rated insulation voltage 300 V AC
Rated surge voltage 6 kV

Nominal power consumption 0.45 W (at 24 V DC)
Input voltage range 24 V DC (19.2 V DC ... 30 V DC)
Recovery time 50 ms
Setting range time 0.1 s ... 300 min. (4 time end ranges)
Setting accuracy ≤ 2.5 % (of scale end value)
Repeat accuracy ≤ 0.5 % (of scale end value)
Control
Connection name Non-floating, terminals A1-B1
Control pulse length ≥ 50 ms

Switching
Contact switching type 1 floating changeover contact
Maximum switching voltage 250 V AC
Interrupting rating (ohmic load) max. 1500 VA (6 A / 250 V AC)
Output fuse 6.3 A (fast-blow)

Connection method Push-in connection
Stripping length 8 mm
Conductor cross section rigid 0.14 mm² ... 2.5 mm²
Conductor cross section flexible 0.14 mm² ... 2.5 mm²
Conductor cross section AWG 26 ... 14

Status display Green LED (POWER)
Yellow LED (relay active)

Width 6.2 mm
Height 80 mm
Depth 86 mm

Color gray (RAL 7042)
Flammability rating according to UL 94 V0
Housing insulation material Polyamide PA, self-extinguishing

Ambient conditions
Degree of protection IP20
Ambient temperature (operation) -20 °C ... 65 °C
Ambient temperature (storage/transport) -25 °C ... 80 °C
Altitude ≤ 2000 m
Permissible humidity (operation) 15 % ... 85 %

CE
Identification CE-compliant
UL, USA/Canada
Identification UL/C-UL Listed UL 508

Low Voltage Directive Conformance with Low Voltage Directive
Noise immunity EN 61000-6-2
Electromagnetic compatibility Conformance with EMC directive
Noise emission EN 61000-6-3

Standards/regulations IEC 61812-1
IEC 60947-5-1

Mounting type DIN rail mounting
Assembly note on standard DIN rail NS 35 in accordance with EN 60715
Mounting position any