MACX MCR-EX-SL-SD-24-48-LP-SP - Solenoid driver

2924126

Ex i solenoid driver. For the intrinsically safe control of Ex i solenoid valves, alarm modules or LEDs installed in the Ex area. Current limitation at 48 mA. For gases up to Group IIC, loop-powered, electrical isolation, SIL 3. Push-in connection.

Product type Solenoid driver
Product family MACX Analog
No. of channels 1
Type Ex i signal conditioners with SIL functional safety
Compatible valve ASCO Coil 195
ASCO Coil 302 (12 V)
Bürkert Coil AC 10 standard
Bürkert Coil AC 10 high resistance
Bürkert Coil AC 21 standard 700 mW / 65°C
Bürkert Coil AC 21 high resistance 700 mW / 65°C
Bürkert Coil AC 21 standard 900 mW / 45°C
Bürkert Coil AC 21 high resistance 900 mW / 45°C
Bürkert Coil AC 21 standard 900 mW / 60°C
Bürkert Coil AC 21 high resistance 900 mW / 60°C
Bürkert Coil G1 642735 standard 800 mW / 40°C
Bürkert Coil G1 642735 high resistance 800 mW / 40°C
Bürkert Coil G1 642735 standard 1000 mW / 40°C
Bürkert Coil G1 642735 high resistance 1000 mW / 40°C
FESTO Coil MFH-...IA-SA-EX GBXE022AIAD03
FESTO Coil (J)MFH-...BIA-SA-EX GBXE022AIAD03
Norgren Herion Coil 2050
Norgren Herion Coil 2051
Norgren Herion Coil 2052
Norgren Herion Coil 2053
Norgren Herion Coil 2080 / 2082
Norgren Herion Coil 2081 / 2083
Norgren Herion Coil 2084
Norgren Herion Coil 3039
Nass Coil 1259 30.1-00
Nass Coil 1259 50.1-00
Parker Coil VZ07 488650.01
Parker Coil VZ33 494035.10
Parker Coil VZ08 488660.01
Parker Coil VZ09 488670.01
Parker Coil VZ95 482160.01 EEx ia IIB T6
Parker Coil VZ23 482870.01
Samson Coil 3701-12 (12 V)
Samson Coil 3701-13 (24 V)
Samson Coil 3963-12 (12 V)
Samson Coil 3963-13 (24 V)
Samson Coil 3964-12 (12 V)
Samson Coil 3964-13 (24 V)
Seitz Pilot valve PV 12F73 Ci oH
Seitz Pilot valve PV 12F73 Xi oH
Seitz Pilot valve PV 12F73 Xi oH-2
Seitz Solenoid coil 11 G 52
Note This is an extract of possible combinations of valves and solenoid drivers.

Electrical isolation 2-way isolation
Maximum temperature coefficient 0.01 %/K
Electrical isolation
Test voltage 2.5 kV AC (50 Hz, 60 s)
Overvoltage category II
Pollution degree 2
Electrical isolation Output/input IEC/EN 60079-11
Standards/regulations IEC/EN 60079-11
Rated insulation voltage 375 VPP
Electrical isolation Output/input IEC/EN 61010-1
Standards/regulations IEC/EN 61010-1
Rated insulation voltage 300 Vrms
Insulation Safe isolation
Supply
Supply voltage range loop-powered, no external supply necessary
Power dissipation < 1.41 W

Signal: Voltage
Number of inputs 1
Voltage input signal 19.2 V DC ... 30 V DC (24 V DC, -20 % ... +25 %)
Max. current input signal 85 mA (Ue = 24 V DC)

Signal: Voltage
Output description intrinsically safe
Number of outputs 1
Output voltage 10.5 V DC (48 mA)
Output resistor 275.7 Ω (Internal resistance Ri)
Current limitation 48 mA
Response time 20 ms
Non-load voltage 24 V DC
Short-circuit-proof yes

Connection method Push-in connection
Stripping length 8 mm
Conductor cross section rigid 0.2 mm² ... 1.5 mm²
Conductor cross section flexible 0.2 mm² ... 1.5 mm²
Conductor cross section AWG 24 ... 16

Ex installation (EPL) Gc
Div. 2
Ex i circuits (EPL) Ga
Da
Ma
Div. 1