SUBCON-PLUS-CAN/90X/M12 - D-SUB bus connector

2902731

D-SUB connector, 9-pos., socket, assignment: 2, 3, 5, 7, 9; two M12 cable entries (A-coded) under 90°. Bus system: CAN, CANopen®. Termination resistor via separate M12 terminator.

The SUBCON-PLUS fast connectors with M12 connection ensure error-free installation of bus systems, thanks to the use of fully-tested components such as cables and connectors. The innovative housing concept is lightweight yet offers optimum mechanical protection against environmental influences. This means that the fast connection plugs are ideal, even in applications subject to vibration. The unique SPEEDCON fast locking system on the M12 connections offers reliable connection with just half a turn.

Product type Data plug
MTTF 6706 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
1817 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%)
155 Years (SN 29500 standard, temperature 40°C, operating cycle 100%)
Pin assignment 2, 3, 5, 7, 9

Nominal voltage UN 5 V
Nominal current IN 100 mA

Tightening torque ... 0.4 Nm
D-SUB connection
Connection method D-SUB socket
M12 connector
Connection method M12 male, A-coded
M12 connector
Connection method M12 female, A-coded

Bus system CAN, CANopen, SafetyBus-P
Signal CAN
CANopen®

Dimensional drawing
Width 16 mm
Height 41 mm
Length 93 mm

Material (Housing) Polyamide

Ambient conditions
Degree of protection IP40
Ambient temperature (operation) -30 °C ... 80 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C
Ambient temperature (assembly) -20 °C ... 80 °C
Altitude ≤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation)
Permissible humidity (operation) 10 % ... 95 % (non-condensing)
Permissible humidity (storage/transport) 5 % ... 95 % (non-condensing)