Company: | 上海当临自动化科技有限公司 |
Location: | China - Shanghai,上海市青浦区练西公路2850号1幢 |
Price: | Negotiation |
Contact: | Jason(Manager) |
Contact Me: |
Tell:+86-19921425125 Mobile:+86-19921425125 Email:11115374448112490805652@36qq9.3c8o12m |
SACC-M12FRB-5PL SH - Connector
SACC-M12FRB-5PL SH - Connector
1424665
Connector, Universal, 5-position, shielded, Socket angled M12, coding: B, Push-lock spring connection, knurl material: Zinc die-cast, nickel-plated, external cable diameter 4 mm ... 8 mm
Assembly note NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties.
Assembly note The connector pin assignment can be rotated 45° to the cable outlet
The wires can be connected both with ferrules and without ferrules
Product type Circular connector (cable-side)
Sensor type Universal
Number of positions 5
No. of cable outlets 1
Shielded yes
Coding B
Cable outlet angled
Insulation characteristics
Overvoltage category II
Degree of pollution 3
Dimensional drawing
Length 48 mm
External dimensions
Outside diameter 4 mm ... 8 mm
Housing
Diameter housing 19 mm
Material TPE-U
PA 6
Flammability rating according to UL 94 V0
Seal material NBR
Material of grip body Zinc die-cast, nickel-plated
Contact material CuSn
Contact surface material Ni/Au
Contact carrier material PA 6.6
Material for screw connection Zinc die-cast, nickel-plated
Standards/regulations PA 6.6: Fire protection in rail vehicles - requirement sets R22, R23, R24, R25, and R26 acc. to DIN EN 45545-2 (Risk level HL1 - HL3)
PA 6: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3)
Conductor connection
Connection method Push-lock spring connection
Connection cross section 0.14 mm² ... 0.75 mm² (without ferrule)
0.08 mm² ... 0.5 mm² (with ferrule)
0.14 mm² ... 0.75 mm² (solid)
Connection cross section AWG 26 ... 18 (without ferrule)
28 ... 20 (with ferrule)
Stripping length of the individual wire 7 mm
Tightening torque 0.4 Nm (M12 knurl)
0.8 Nm (Connector with coupling sleeve)
3 Nm (Pressure nut with coupling sleeve)
Pin assignment
Contact | Color (signal designation) | Contact (optional) 1 = BN
2 = WH
3 = BU
4 = BK
5 = GY
Rated surge voltage 1.5 kV
Contact resistance ≤ 8 mΩ
Insulation resistance ≥ 100 MΩ
Nominal voltage UN 48 V AC
60 V DC
Nominal current IN 4 A (2 A when using 0.14 mm² conductors)
Mechanical data
Insertion/withdrawal cycles ≥ 100
Connection 1
Head design Socket
Head cable outlet angled
Head thread type M12
Coding B
Signal type/category Universal
Stripping length of the individual wire 7 mm
Ambient conditions
Degree of protection IP65
IP67
Ambient temperature (operation) -40 °C ... 85 °C (Plug / socket)
Disclaimer:All information is provided by registered users. You may assess risks based on corresponding qualifications.
- CY7C68013A-56LTXC.CYPRESSIntroducing the CY7C68013A-56LTXC , the latest in cutting-edge USB technology ." "
- MAX4544EUT+T.MAXhe MAX4544EUT+ is the ultimate solution for all your audio and video signal processing needs ." "
- VNQ7040AYTR.STIntroducing the VNQ7040AYTR , the latest innovation in technology that is sure to take your experience to the next level ." "
- TMS320F28335PGFA.FZXIntroducing the TMS320F28335PGFA , the latest and most advanced microcontroller from Texas Instruments ." "