Company: | 上海当临自动化科技有限公司 |
Location: | China - Shanghai,上海市青浦区练西公路2850号1幢 |
Price: | Negotiation |
Contact: | Jason(Manager) |
Contact Me: |
Tell:+86-19921425125 Mobile:+86-19921425125 Email:9114054349810472986513510@80qq80.c8o10m |
REL-IR4 LDP-110DC 4X21 - Single relay
REL-IR4/LDP-110DC/4X21 - Single relay
2903680
Plug-in industrial relay with power contacts, 4 changeover contacts, test button, status LED, freewheeling diode, mechanical switching position indicator, polarity: A1+, A2-, coil voltage: 110 V DC
Product type Single relay
Operating mode 100% operating factor
Mechanical service life approx. 2x 107 cycles
Insulation characteristics
Insulation Basic insulation
Insulation characteristics
Insulation Basic insulation
Overvoltage category II
Pollution degree 2
Service life electrical see diagram
Maximum power dissipation for nominal condition 0.88 W
Test voltage (Winding/contact) 2.5 kVrms (50 Hz, 1 min., winding/contact)
Test voltage (Changeover contact/changeover contact) 2 kVrms (50 Hz, 1 min., changeover contact/changeover contact)
Rated insulation voltage 250 V AC
Rated surge voltage 2.5 kV
Coil side
Nominal input voltage UN 110 V DC
Input voltage range 88 V DC ... 198 V DC (20 °C)
Drive and function monostable
Drive (polarity) polarized
Typical input current at UN 8 mA
Typical response time 13 ms
Typical release time 14 ms
Protective circuit Freewheeling diode
Status display Yellow LED
Switching
Contact switching type 4 changeover contacts
Type of switch contact Single contact
Contact material AgNi
Maximum switching voltage 250 V AC/DC
Minimum switching voltage 5 V (At 24 mA)
Limiting continuous current 6 A
Maximum inrush current 16 A (20 ms, N/O contacts)
Min. switching current 5 mA (at 24 V)
Interrupting rating (ohmic load) max. 144 W (at 24 V DC)
124 W (at 48 V DC)
108 W (at 60 V DC)
52 W (at 110 V DC)
48 W (at 220 V DC)
1500 VA (for 250 V AC)
Switching capacity min. 0.12 W
Switching capacity 2 A (at 24 V, DC13)
0.22 A (at 120 V, DC13)
0.11 A (at 250 V, DC13)
1.5 A (at 24 V, AC15)
1.5 A (at 120 V, AC15)
1 A (at 240 V, AC15)
Motor load according to UL 508 1/3 HP, 240 V AC
Connection method Plug-in connection
Width 21.2 mm
Height 27.5 mm
Depth 35.6 mm
Ambient conditions
Degree of protection RT I
Ambient temperature (operation) -40 °C ... 70 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C
![REL-IR4 LDP-110DC 4X21 - Single relay REL-IR4 LDP-110DC 4X21 - Single relay](https://pic.1688club.com/1247/products/4938f497989fba011c59f91eae4b32f8.jpg)
Disclaimer:All information is provided by registered users. You may assess risks based on corresponding qualifications.
![](https://pic.1688club.com/1247/products/s_0655b39dd78bbbc69d4ba0b9e9844118.jpg)
![](https://pic.1688club.com/1247/products/s_0655b39dd78bbbc69d4ba0b9e9844118.jpg)
![](https://pic.1688club.com/1247/products/s_33020ea36a7a2a750b1802e63246c18d.jpg)
![](https://pic.1688club.com/1247/products/s_33020ea36a7a2a750b1802e63246c18d.jpg)
![](https://pic.1688club.com/1247/products/s_33020ea36a7a2a750b1802e63246c18d.jpg)
![](https://pic.1688club.com/1247/products/s_58d08ed5999200974264e39374f59dfe.jpg)
Kuinka palauttaa Instagram-tilisi salasana Instagram-chat-tuki
Haluatko palauttaa Instagram-tilisi salasanan , mutta et tiedä miten Ei hätää , me autamme sinua !" "Casting Wax for High-End Hardware
Casting wax , high and medium temperature precision casting particles , bead shaped , high hardness , small linear shrinkage , good toughness , good" "with Good Hardness Oxidized Polyethylene Wax PE Wax
Features and Benefits : 1.Low viscosity 2.Good thermal stability 3.Good dispersion Properties Unit Test Method Specifications Melting point ºC ASTM E 28" "Wax Injector Material Jewelry Lost Wax Casting Wax
Casting wax , high and medium temperature precision casting particles , bead shaped , high hardness , small linear shrinkage , good toughness , good" "