AXL E PN DI8 DO8 M12 6P - Digital module

2701509

Axioline E, Digital I/O device, PROFINET, M12 connector, Digital inputs: 8, 24 V DC, connection technology: 4-conductor, Digital outputs: 8, 24 V DC, connection technology: 3-conductor, Plastic housing, degree of protection: IP65/IP67

Width 60 mm
Height 185 mm
Depth 30.5 mm
Drill hole spacing 198.5 mm
Note on dimensions The height is 212 mm including fixing clips.

Utilization restriction
EMC note EMC: class A product, see manufacturer's declaration in the download area

Housing material Pocan®
Color anthracite

PROFINET
Number of interfaces 2
Connection method M12 connector
Note on the connection method D-coded
Number of positions 4
Transmission speed 100 Mbps (with auto negotiation)
PROFINET
Equipment type PROFINET-Device
System-specific protocols PROFINET protocols LLDP
PROFINET protocols MRP client
PROFINET protocols DCP
PROFINET protocols DCE/RPC
Protocols supported SNMP v1
HTTP
TFTP
FTP

Digital:
Input name Digital inputs
Description of the input EN 61131-2 types 1 and 3
Number of inputs 8
Cable length max. 30 m (to the sensor)
Connection method M12 connector, double occupancy
Connection technology 4-conductor
Input voltage range "0" signal 0 V DC ... 5 V DC
Input voltage range "1" signal 11 V DC ... 30 V DC
Nominal input voltage UIN 24 V DC
Nominal input current at UIN typ. 3 mA
Sensor current per channel typ. 75 mA (from US)
Total sensor current max. 0.6 A (per device)
Input filter time < 1000 µs
Protective circuit Overload protection, short-circuit protection of sensor supply

Digital:
Output name Digital outputs
Connection method M12 connector, double occupancy
Connection technology 3-conductor
Number of outputs 8
Protective circuit Overload protection, short-circuit protection of outputs; yes
Output voltage 24 V DC
Limitation of the voltage induced on circuit interruption -28 V ... -17 V
Maximum output current per channel 500 mA
Nominal output voltage 24 V DC (from voltage UA)
Output voltage range 18 V DC ... 31.2 V DC
Output voltage when switched off max. 1 V
Output current when switched off max. 20 µA
Nominal load, inductive 12 VA (1.2 H, 48 Ω, with nominal voltage)
Nominal load, ohmic 12 W (48 Ω, with nominal voltage)
Switching frequency max. 5500 per second (with at least 50 mA load current)
max. 1 per second (with inductive load)
Reverse voltage resistance to short pulses Reverse voltage proof
Behavior with overload Auto restart
Signal delay max. 150 µs (when switched on)
max. 200 µs (when switched off)
Overcurrent shut-down min. 0.7 A

Product type I/O component
Product family Axioline E
Type Stand-Alone
Special properties Plastic housing

Potentials
Voltage supply US 24 V DC
Power supply at US max. 4 A
Current consumption from US typ. 8 mA
max. 1.2 A