FL SFP LX10-B - Media module

1025401

Gigabit SFP module for transmission up to 10 km with a wavelength of 1310 nm.

SFP module with a data transmission speed of 1000 Mbps at a wavelength of 1310 nm, and a maximum transmission length of 10 km.

Width 13.7 mm
Height 8.95 mm
Length 56.5 mm

Mounting type Insert in SFP slot

Ethernet FO
Connection method LC
Transmission speed 1 Gbps
Transmit capacity, minimum -9.5 dBm
Transmit capacity, maximum -3 dBm
Minimum receiver sensitivity -21 dBm
Maximum receiver sensitivity -3 dBm
Transmission physics Single-mode fiberglass
Transmission length 10 km (Fiberglass 9/125)
Wavelength 1310 nm
Signal LEDs depending on the Factoryline device
No. of channels 1 (LC single mode)

Product type SFP module
Type Factoryline devices with SFP slot
Format SFP (Small Form-factor Pluggable)

Status display via a Factoryline device

Transmission medium FO

Ambient conditions
Degree of protection IP20
Ambient temperature (operation) 0 °C ... 70 °C (non-condensing)
Ambient temperature (storage/transport) -40 °C ... 85 °C (non-condensing)
Case temperature max. 70 °C (Operation)
Permissible humidity (operation) 30 % ... 95 % (non-condensing)
Permissible humidity (storage/transport) 30 % ... 95 % (non-condensing)
Vibration (operation) in acc. with IEC 60068-2-6: 5g, 150 Hz
Air pressure (operation) 86 kPa ... 108 kPa (1500 m above sea level)
Air pressure (storage/transport) 66 kPa ... 108 kPa (3500 m above sea level)

Standard designation Laser equipment safety
Standards/specifications IEC 60825