Company: | 上海当临自动化科技有限公司 |
Location: | China - Shanghai,上海市青浦区练西公路2850号1幢 |
Price: | Negotiation |
Contact: | Jason(Manager) |
Contact Me: |
Tell:+86-19921425125 Mobile:+86-19921425125 Email:1315954441048472980505213@q24q.116co12m |
INJ 1000-T - Injector
INJ 1000-T - Injector
2703006
PoE injector, 30 W, two RJ45 jacks, 10/100/1000 Mbps, DIN rail mounting, IP20, expanded temperature range of -40°C ... 75°C
The midspan injectors connect Ethernet devices without PoE (e.g., switches) to PoE-capable end devices (e.g., IP cameras). As power sourcing equipment (PSE), the injector supplies the required power to a powered device (PD) via the data cable. The injector and end device negotiate the electrical power requirements autonomously.
Dimensional drawing
Width 30.2 mm
Height 130 mm
Depth 120 mm
Color gray
Housing material Plastic
Mounting type DIN rail mounting
Mounting position vertical
Basic functions PSE/Midspan, compliant with IEEE 802.3af, at
Data: Power over Ethernet
Serial transmission speed 10/100/1000 Mbps
Connection method RJ45 jack
No. of channels 1
Pin assignment 1:1
Transmission length 100 m (including patch cables)
Output nominal voltage 54 V DC (PoE)
Output power 30 W
Data: Ethernet
Connection method RJ45 CAT5e
Product type Injector
MTTF 110 Years (MIL-HDBK-217F standard, temperature 25°C, operating cycle 100%)
Maximum power dissipation for nominal condition 33.6 W
Supply
Supply voltage range 18 V DC ... 57 V DC (Ordinary locations)
24 V DC ... 48 V DC (Hazardous locations)
Nominal supply voltage 24 V DC
48 V DC
Max. current consumption 2.1 A
1.4 A (24 V DC)
0.7 A (48 V DC)
Power consumption ≤ 36 W
Protective circuit Reverse polarity protection
Supply
Conductor cross section flexible, with ferrule without plastic sleeve 0.25 mm² ... 2.5 mm²
Conductor cross section, flexible, with ferrule, with plastic sleeve 0.25 mm² ... 2.5 mm²
Conductor cross section, flexible 0.20 mm² ... 2.50 mm²
Conductor cross section, rigid 0.20 mm² ... 2.50 mm²
Conductor cross section AWG 20 ... 12
Ambient conditions
Degree of protection IP20 (Non-certificated by UL)
Ambient temperature (operation) -40 °C ... 75 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C
Altitude ≤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation)
≤ 2000 m (with UL approval)
Permissible humidity (operation) 10 % ... 95 % (non-condensing)
CE
Identification CE-compliant
UL, USA/Canada
Identification Class I, Div. 2, Groups A, B, C, D T4
Disclaimer:All information is provided by registered users. You may assess risks based on corresponding qualifications.
- Kuinka palauttaa Instagram-tilisi salasana Instagram-chat-tukiHaluatko palauttaa Instagram-tilisi salasanan , mutta et tiedä miten Ei hätää , me autamme sinua !" "
- Casting Wax for High-End HardwareCasting wax , high and medium temperature precision casting particles , bead shaped , high hardness , small linear shrinkage , good toughness , good" "
- with Good Hardness Oxidized Polyethylene Wax PE WaxFeatures and Benefits : 1.Low viscosity 2.Good thermal stability 3.Good dispersion Properties Unit Test Method Specifications Melting point ºC ASTM E 28" "
- Wax Injector Material Jewelry Lost Wax Casting WaxCasting wax , high and medium temperature precision casting particles , bead shaped , high hardness , small linear shrinkage , good toughness , good" "