Company: | 上海当临自动化科技有限公司 |
Location: | China - Shanghai,上海市青浦区练西公路2850号1幢 |
Price: | Negotiation |
Contact: | Jason(Manager) |
Contact Me: |
Tell:+86-19921425125 Mobile:+86-19921425125 Email:7131510410748610490829555@84qq12.87co9m |
SACC-M12MSD-4CT-CM SH PN - Data connector
SACC-M12MSD-4CT-CM SH PN - Data connector
1422846
Data connector, PROFINET CAT5 (100 Mbps), 4-position, shielded, Plug straight M12, coding: D, Crimp connection, knurl material: Zinc die-cast, tin-plated, external cable diameter 4.5 mm ... 7.5 mm, without crimp contacts
General This product corresponds to the PROFINET Cabling and Interconnection Technology Guideline for PROFINET regulations, version 2.00, order no: 2.252, Chapter 8.2 Connectors for Outside Environment (Balanced cabling)
Assembly note NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties.
Assembly note Contacts can be clipped in place and unclipped without tools
Product type Circular connector (cable-side)
Application Data
Sensor type PROFINET
Number of positions 4
No. of cable outlets 1
Shielded yes
Coding D
Cable outlet straight
Insulation characteristics
Overvoltage category II
Degree of pollution 3
Dimensional drawing
Length 43 mm
Wrench size, union nut 15 mm
Wrench size, counter nut 14 mm
External dimensions
Outside diameter 4.5 mm ... 7.5 mm
Housing
Diameter housing 16 mm
Flammability rating according to UL 94 V0
Seal material FKM
Material of grip body Zinc die-cast, nickel-plated
Contact carrier material PA 6.6
Material for screw connection Zinc die-cast, tin-plated
Standards/regulations PA 6.6: Fire protection in rail vehicles - requirement sets R22, R23, R24, and R26 acc. to DIN EN 45545-2 (Risk level HL1 - HL3)
Conductor connection
Connection method Crimp connection
Connection cross section 0.14 mm² ... 1 mm² (flexible)
Connection cross section AWG 26 ... 18 (flexible)
Stripping length of the individual wire 4 mm +0,5 mm
Tightening torque 0.4 Nm (M12 knurl)
4 Nm (Pressure nut with coupling sleeve)
Pin assignment
Contact | Color (signal designation) | Contact (optional) 1 = YE
2 = WH
3 = OG
4 = BU
Rated surge voltage 2.5 kV
Insulation resistance ≥ 100 MΩ
Nominal voltage UN 48 V AC
60 V DC
Nominal current IN 4 A
Mechanical data
Insertion/withdrawal cycles ≥ 100
Connection 1
Head design Plug
Head cable outlet straight
Head thread type M12
Coding D
Signal type/category PROFINET CAT5 (IEC 11801), 100 Mbps
Stripping length of the individual wire 4 mm +0,5 mm
Disclaimer:All information is provided by registered users. You may assess risks based on corresponding qualifications.
- KM0-M711D-00X YAMAHA 33A NOZZLEKM0-M711D-00X YAMAHA 33A NOZZLE www ( dot ) smt-cn ( dot ) com Skype :14786692449 sale (at ) hysmt ( dot ) cn Other yamaha NOZZLE :" "
- KM0-M711A-31X YAMAHA 31A NOZZLEKM0-M711A-31X YAMAHA 31A NOZZLE www ( dot ) smt-cn ( dot ) com Skype :14786692449 sale (at ) hysmt ( dot ) cn Other yamaha parts : YAMAHA YV100X" "
- KLW-M3712-02 protect cover for feeder trolleyKLW-M3712-02 protect cover for feeder trolley www ( dot ) smt-cn ( dot ) com Skype :14786692449 sale (at ) hysmt ( dot ) cn Other yamaha parts :" "
- KLW-M741S-A00 SHAFT,SPAREKLW-M741S-A00 SHAFT,SPARE www ( dot ) smt-cn ( dot ) com Skype :14786692449 sale (at ) hysmt ( dot ) cn Other yamaha parts : No. Part No. Part Name Q'ty" "