AXL F BK PN TPS - Bus coupler

2403869

Axioline F, Bus coupler, PROFINET, RJ45 jack, transmission speed in the local bus: 100 Mbps, degree of protection: IP20, including bus base module and Axioline F connector

The bus coupler is intended for use within a PROFINET network. The bus coupler creates the link to the Axioline F I/O system and the industrial I/O signals connected to it. Up to 63 Axioline F devices can be connected to the bus coupler. Device descriptions for Phoenix Contact controllers are integral parts of the engineering tools PC Worx and PLCnext Engineer. Corresponding GSDML files are available for integrating the Axioline F station into other programming systems. These files can be downloaded at: www.phoenixcontact.com/product/2403869

Dimensional drawing
Width 45 mm
Height 126.1 mm
Depth 74 mm
Note on dimensions The depth applies when a TH 35-7.5 DIN rail is used (in accordance with EN 60715).

Utilization restriction
EMC note EMC: class A product, see manufacturer's declaration in the download area

PROFINET
Number of interfaces 2
Connection method RJ45 jack
Note on the connection method Auto negotiation and autocrossing
Transmission speed 100 Mbps (full duplex)
Transmission physics Ethernet in RJ45 twisted pair
Axioline F local bus
Number of interfaces 1
Connection method Bus base module
Transmission speed 100 Mbps
Service
Number of interfaces 1
Connection method USB type C

System limits
Number of supported devices max. 63 (per station)
Number of local bus devices that can be connected max. 63
PROFINET
Device function PROFINET device
Specification Version 2.3
Conformance Class Conformance-Class C
Device ID 1000hex
Vendor ID 00B0hex

Product type I/O component
Product family Axioline F
Type block modular
Mounting position any (observe temperature derating)
Scope of delivery including bus base module and Axioline F connector
Insulation characteristics
Overvoltage category II (IEC 60664-1, EN 60664-1)
Pollution degree 2 (IEC 60664-1, EN 60664-1)

Maximum power dissipation for nominal condition max. 2.5 W
Potentials: Communications power UL feed-in (the supply of the Axioline F local bus UBus is generated from UL)
Supply voltage 24 V DC
Supply voltage range 19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current draw max. 600 mA (2.0 A at UBus, UL = 24 V, up to HW 03)
max. 700 mA (2.5 A at UBus, UL = 24 V, from HW 04)
Power consumption max. 14.4 W (2.0 A at UBus, UL = 24 V, up to HW 03)
max. 16.8 W (2.5 A at UBus, UL = 24 V, from HW 04)
Protective circuit Surge protection; electronic
Reverse polarity protection; no
Potentials: Axioline F local bus supply (UBus)
Supply voltage 5 V DC (via bus base module)
Power supply unit max. 2 A (up to HW 03)
max. 2.5 A (from HW 04)