QUINT4-PS/1AC/5DC/5/PT - Power supply unit

2904595

Primary-switched power supply unit QUINT POWER, Push-in connection, DIN rail mounting, input: 1-phase, output: 5 V DC / 5 A

In the power range of up to 100 W, QUINT POWER provides superior system availability in the smallest size. Preventative function monitoring and exceptional power reserves are available for applications in the low-power range.

AC operation
Input voltage range 100 V AC ... 240 V AC -15 % ... +10 %
Electric strength, max. 300 V AC (60 s)
Typical national grid voltage 120 V AC
230 V AC
Voltage type of supply voltage AC/DC
Inrush current typ. 9.1 A (at 25 °C)
Inrush current integral (I2t) < 0.1 A2s
Inrush current limitation < 9.1 A
Frequency range (fN) 50 Hz ... 60 Hz -10 % ... +10 %
Mains buffering time typ. 52 ms (120 V AC)
typ. 52 ms (230 V AC)
Current consumption 0.37 A (100 V AC)
0.3 A (120 V AC)
0.17 A (230 V AC)
0.16 A (240 V AC)
Nominal power consumption 32.8 VA
Protective circuit Transient surge protection; Varistor
Typical response time 350 ms
Input fuse 3.15 A (slow-blow, internal)
Recommended breaker for input protection 6 A ... 16 A (Characteristic B, C or comparable)
Discharge current to PE < 0.25 mA (264 V AC, 60 Hz)
typ. 0.08 mA
DC operation
Input voltage range 110 V DC ... 250 V DC -20 % ... +40 %
Voltage type of supply voltage AC/DC
Current consumption 0.32 A (110 V DC)
0.14 A (250 V DC)

Efficiency typ. 87.4 % (120 V AC)
typ. 88.4 % (230 V AC)
Nominal output voltage 5 V DC
Setting range of the output voltage (USet) 5 V DC ... 6.2 V DC (constant capacity)
Nominal output current (IN) 5 A
Static Boost (IStat.Boost) 6.25 A (≤ 40 °C)
Dynamic Boost (IDyn.Boost) 8 A (≤ 60 °C (5 s))
Feedback voltage resistance ≤ 16 V DC (16 V e-caps in output circuit)
Protection against overvoltage at the output (OVP) < 8 V DC
Control deviation < 0.3 % (change in load, static 10 % ... 90 %)
< 3 % (Dynamic load change 10% ... 90%, 10 Hz < 4%)
< 0.1 % (change in input voltage ±10 %)
Residual ripple < 50 mVPP (with nominal values)
Short-circuit-proof yes
No-load proof yes
Output power 25 W
31 W
40 W
Maximum no-load power dissipation < 0.37 W (120 V AC)
< 0.41 W (230 V AC)
Power loss nominal load max. < 3.7 W (120 V AC)
< 3.3 W (230 V AC)
Crest factor typ. 1.88 (120 V AC)
typ. 2.09 (230 V AC)
Rise time 50 ms (UOut = 10 % ... 90 %)
Connection in parallel yes, for redundancy and increased capacity
Connection in series yes
Signal (configurable)
Digital 0 V DC 10 V DC 24 mA
Default 10 V DC 24 mA 10 V DC for UOut > 0.9 x USet

Input
Connection method Push-in connection
Conductor cross section, rigid min. 0.2 mm²
Conductor cross section, rigid max. 2.5 mm²
Conductor cross section flexible min. 0.2 mm²
Conductor cross section flexible max. 2.5 mm²
Single conductor/terminal point, stranded, with ferrule, min. 0.25 mm²
Single conductor/terminal point, stranded, with ferrule, max. 2.5 mm²
Conductor cross section AWG min. 24
Conductor cross section AWG max. 14
Stripping length 10 mm