PT 4X1- 5DC-ST - Surge protection plug

2838306

Protective plug PT with protective circuit for 4 conductors of signal circuits grounded on one side. Nominal voltage: 5 V DC

Product type Surge protection for MCR technology
Product family PLUGTRAB PT
IEC test classification C1
C2
C3
D1
VDE requirement class C1
C2
C3
D1
Type Male
Surge protection fault message none
Arrester can be tested with CHECKMASTER from software version: From SW rev. 1.00
Insulation characteristics
Overvoltage category III
Pollution degree 2

Nominal voltage UN 5 V DC

Connection method Screw connection (in connection with the base element)
Screw thread M3
Tightening torque 0.8 Nm
Conductor cross section flexible 0.2 mm² ... 2.5 mm²
Conductor cross section rigid 0.2 mm² ... 4 mm²
Conductor cross section AWG 24 ... 12

Dimensional drawing
Width 17.7 mm
Height 45 mm
Depth 52 mm
Horizontal pitch 1 Div.
Complete module width 17.7 mm
Complete module height 90 mm
Complete module depth 65.5 mm

Color black (RAL 9005)
Copper
Flammability rating according to UL 94 V-0
Housing material PA 6.6

Mechanical data
Open side panel No

Direction of action Line-Line & Line-Signal Ground/Shield & optional Signal Ground/Shield-Earth Ground
Maximum continuous voltage UC 6 V DC
4 V AC
Rated current 300 mA (45 °C)
Operating effective current IC at UC ≤ 1 mA
Residual current IPE ≤ 1 µA (with PT 4X1+F-BE)
≤ 4 mA (Directly grounded)
Nominal discharge current In (8/20) µs (line-ground) 10 kA
Pulse discharge current Iimp (10/350) µs 2.5 kA (per path)
Total discharge current Itotal (8/20) µs 20 kA
Max. discharge current Imax (8/20) µs maximum (line-earth) 10 kA
Nominal pulse current Ian (10/1000) µs (line-earth) 125 A
Output voltage limitation at 1 kV/µs (line-earth) spike ≤ 14 V
Output voltage limitation at 1 kV/µs (line-earth) static ≤ 10 V
Residual voltage at In (conductor-ground) ≤ 10 V