IB IL CAN-MA-PAC - Communication module

2700196

Inline CAN master, for connecting a CAN bus system, complete with accessories (connector and marking field)

The terminal is designed for use within an Inline station. It can be used to integrate a lower-level CAN bus system into the Inline station and therefore into the bus system used. Within the Inline station, the terminal acts as a CAN master for the lower-level CAN system.

Dimensional drawing
Width 12.2 mm
Height 136.8 mm
Depth 71.5 mm

Inline local bus
Number of interfaces 2
Connection method Inline data jumper
Transmission speed 500 kbps
CAN bus
Number of interfaces 1
Connection method Inline shield connector
Transmission speed 250 kbps
Protocols supported CAN
S-PORT
Number of interfaces 1 (Interface with plugged in memory stick)

Local diagnostics
Error messages via the bus CAN bus voltage faulty
Bus stop
Module
ID code (dec.) 191
ID code (hex) BF
Length code (hex) 20
Length code (dec) 32
Process data channel 64 Byte
Input address area max. 64 Byte
Output address area max. 64 Byte
Register length 64 Byte
Required parameter data 1 Byte
Required configuration data 5 Byte

Product type I/O component
Product family Inline
Type modular
Scope of delivery including Inline connector and labeling field
Operating mode Process data mode with up to 64 words

Power dissipation 0.9 W (Module)
Potentials
Power consumption typ. 1.06 W (entire device)
max. 1.16 W (entire device)
Potentials: Communications power (UL)
Supply voltage 7.5 V DC (via voltage jumper)
Current draw max. 115 mA
typ. 110 mA
Potentials: Main circuit supply (UM)
Supply voltage 24 V DC (via voltage jumper)
Current draw max. 12 mA
typ. 10 mA
Electrical isolation/isolation of the voltage ranges
Test voltage: 24 V supply UM, bus, logic/CAN interface 500 V AC, 50 Hz, 1 min.
Test voltage: 24 V supply UM, bus, logic/functional ground 500 V AC, 50 Hz, 1 min.
Test voltage: CAN interface/functional ground 500 V AC, 50 Hz, 1 min.

Connection technology
Connection name Inline connector